01
Small electric drill holder

Small electric drill holder

The mini electric drill is fixed on the operating arm of the locator, and the drilling depth is controlled by the lifting and lowering of the operating arm of the locator. The operation is convenient and accurate, avoiding damage to the animal brain tissue or causing excessive drilling depth. The clamping range is 19.5mm.

MORE >

Cranial Drill Holder

Cranial Drill Holder

The cranial drill holder fixes the hand-held cranial drill to the operating arm of the locator, and controls the drilling depth through the lifting and lowering of the operating arm of the locator. The operation is convenient and accurate, and avoids damage to animal brain tissue or excessive drilling depth. The holding range is 14.5mm.

MORE >

Ceramic pin holder

Ceramic pin holder

Designed for optogenetic experiments, the size is 1.25 or 2.5mm, compatible with ceramic ferrules and metal ferrules, and can be easily removed after implantation. 1056420-1.25mm cannula or pin.

MORE >

electrode holder

electrode holder

For the electrophysiological experimental design, the two electrodes can be close to the distance of 200um when the arms are operated, and the clamping range is 0.4mm-1.5mm.

MORE >

Casing Holder

Casing Holder

It adopts threaded fixing and locking method to hold single and double catheters for micro-dosing with a plastic base with an outer diameter of 3.5mm.

MORE >

electrode holder

electrode holder

The wedge-shaped structure is adopted, and the clamping range is 0.9mm-3mm.

MORE >

electrode holder

electrode holder

For the design of electrophysiological experiments, the distance between the two arms to operate the electrodes is very close. This gripper is very suitable for this requirement. It can grip relatively thin electrodes, and the gripping range is 0.7mm-2.5mm.

MORE >

Casing Holder

Casing Holder

It is suitable for the operation mode of the double-arm locator. The distance between the double casings can be close to 0.3mm, and the clamping range is 2.1mm-5.0mm. It can clamp the electrodes of Zhongshi Technology casing series and corresponding models.

MORE >

Casing Holder

Casing Holder

It is used to hold 3.5mm syringes and Alzet micro-dosing sustained-release pumps, and is also especially suitable for holding the micro-dosing cannula products developed by Zhongshi Technology.

MORE >

Standard Gripper - Side Type

Standard Gripper - Side Type

Similar to the standard gripper design, but it is suitable for a wider range of electrodes or microinjection needles, with a gripping range of 0.4mm-4.0mm.

MORE >

Ceramic pin holder

Ceramic pin holder

Designed for optogenetic experiments, the size is 1.25 or 2.5mm, compatible with ceramic ferrules and metal ferrules, and can be easily removed after implantation. 1056464-2.5mm cannula or pin.

MORE >

A/P Zero Corrector (customized)

A/P Zero Corrector (customized)

The A/P Zero Corrector enables electrode placement when the animal is fixed on the Large Animal Positioner

MORE >

< 123456 >