Language
- 中文版
- ENGLISH

Electrode Corrector

This electrode angle corrector can quickly and accurately complete the stereotaxic positioning of the electrode at any angle, including right angle and compound angle.

Pre-consultation

Description Parameters Resources

This electrode angle corrector can quickly and accurately complete the stereotaxic positioning of the electrode at any angle, including right angle and compound angle. Using this corrector can determine the coordinate position of front and rear, horizontal and vertical directions, can choose the angle and move horizontally to the correct coordinate position. The manipulator arm is placed on the dovetail arm. After setting the angle, the manipulator arm is adjusted until the electrode tip moves to the correct coordinate in the vertical direction.

A vernier caliper with an accuracy of 0.1mm is attached to the movable slider of the horizontal chute. When the slider is set at the zero point, the zero point of the chute is located on the zero point of the ear bar, and the horizontal chute and the rotating rod in the vertical direction are fixed on the zero point.

Document download