Language
- 中文版
- ENGLISH

Enhanced high-frequency electric knife

Description Parameters Resources

The output of this machine is fully suspended, with two independent and isolated CF-type anti-defibrillation application parts (unipolar and bipolar), non-AP, APG type common equipment, 110V ~ 220V ± 10% mains power supply.

The 416KHz (±10 %) high-frequency current generated by this machine can perform surgical operations such as cutting and coagulation of biological tissues. It has unipolar pure cutting: pure cutting, mixed cutting 1, mixed cutting 2, and monopolar coagulation: spray coagulation , soft coagulation and standard bipolar coagulation six working modes.

1. Fully suspended power supply, broadband voltage input is not affected by unstable power supply. The high-frequency leakage current is 2 times lower than the national standard (≤150mA).

2. The output power error is ±3%. (GB ±20%)

3. Full-featured automatic power compensation.

4. Unipolar can be output by hand or by foot.

5. The machine has a power-off protection circuit, which can memorize the output setting value of the previous use.

6. Remote fault diagnosis.

7. Odor removal rate: 99%@1 year (within one year of equipment use, the odor removal rate reaches 99%)

Rated output power:

a) Pure cutting: 1W～350W (load 500Ω); precise cutting without focal gamma, 100% cutting.

b) Cutting 1: 1W～200W (load 500Ω); superficial focal gamma precision cutting 80% cutting, 20% coagulation.

c) Cutting 2: 1W～120W (load 500Ω); 60% cutting, 40% coagulation.

d) Spray coagulation: 1W～150W (load 500Ω); large area coagulation

e) Soft coagulation: 1W～80W (load 500Ω); precise superficial point coagulation

f) Standard bipolar coagulation: 1W～70W (load 100Ω);

normal operation

a) Ambient temperature range: 5℃～40℃;

b) Relative humidity range: ≤95%;

c) Atmospheric pressure range: 500～1060kPa;

d) Power supply: 110～220V±22V, 50～60Hz±1Hz;

e) Working frequency: 416kHz;

Power consumption of the whole machine: ≤1100VA. (cutting function 350W);

This parameter is the basic parameter of the equipment, please contact our company for specific parameters

Document download