Small Animal Anesthesia Positioning Microinjection Imaging System

1. Professional anesthesia machine for small animals, suitable for animals within 10KG, suitable for rodents, mice and other small animals
2. Produced by professional animal anesthesia machine manufacturers, with superior product quality and stable performance, ISO9001/CE quality certification
3. Precise electronic oxygen flow control, the adjustment range is 20ul-10ml/min, and the step machine is adjusted to 0.01ml, which is precisely adjustable, suitable for low-flow anesthesia of small animals
4. The output concentration is adjustable from 0-5%. The adjustment accuracy is 0.01%, which meets the requirements of anesthetics and volatile drugs such as isoflurane or sevoflurane aerosol, and realizes multiple uses of one machine, and the output accuracy is 1ul/min
5. Equipped with a small animal anesthesia induction box, which can clearly observe the anesthesia depth of anesthetized animals
6. 48H ultra-long timing, the timing button can be set by itself within the range of 10 minutes to 48 hours, and the oxygen source will be automatically turned off after the set time, which is more conducive to observing animal experiments and safer.
7. Negative pressure pumping: 1-100l/h, which can realize exhaust gas recovery of no less than 5 different anesthesia channels. The real-time display unit of air flow is sccm, and the real-time display unit of air pressure in the exhaust gas recovery container is kpa. It has a low-pressure alarm function. Air flow curve. real-time display
8. High efficiency and low noise: The 5-inch touch screen has its own lock screen function, and the exhaust gas absorption effect is good; compared with other similar recyclers, the noise is lower, the volume is smaller, and the size is 20*15*30cm
9. Weighing function: the weight of the gas filter tank can be weighed and displayed at any time, and the superior adsorption material is selected to effectively ensure the adsorption saturation value of the exhaust gas
10. Use environment: The use temperature can be adjusted in real time according to the ambient temperature, and the concentration of carbon dioxide and oxygen can be monitored in real time.
11. Working mode: injection only, extraction only, injection/extraction, extraction/injection, continuous mode
12. Available syringe specifications: 0.5-1000ul, linear thrust: 11lbs/min, flow rate: 3.66 pl/min (0.5ul syringe)-3.818 ml/min (1000ul syringe) The controller has built-in standard syringe specifications of major manufacturers; Define Syringe Specifications (Non-Standard Syringes)
13. Step rate: 27.5 seconds/microstep-52 microseconds/microstep 0.433 um/min-228.97 mm/min; Accuracy: ±0.5% Repeatability: ±0.05%
14. Power-off memory function to remember the setting parameters before power-off 4.3-inch WQVGA TFT color LCD touch panel setting parameters (syringe diameter, injection rate, injection volume, injection/withdrawal operation
15. The level calibration adjuster accurately indicates the levelness, the angle table scale has an accuracy of 1 degree for the upper thruster, 1.8 degree for the lower thruster, and 0.2 degree accuracy
16. The movement range of the operating arm can reach up to 80mm up and down, left and right, front and rear, the vertical direction can be rotated 180 degrees and locked at any position at any time, and the horizontal direction can be rotated 360 degrees and locked at any position at any time
17. Flow correction: Compensation setting for liquid density changes caused by environmental changes such as temperature and humidity, resulting in deviations in the quality of the output liquid
18. It can be used with micro-injection pump, microscopic camera device and cranial drill. Laser scale and open U-shaped base design make reading more convenient. Double-ended screw design makes the operation arm move up and down, left and right, and back and forth more accurately and smoothly
19. Only the incisors are needed to fix the skulls of rats and mice, which saves the time for fixing the ear rods; saves the time for fixing the level of the animal skulls and aligning the sagittal sutures, and provides help for beginners to fix the skulls of rats and mice
20. According to the 3D printing design of rat and mouse skull, it can be adjusted to meet the needs of different weight rat and mouse skull fixation
21. The reading accuracy of moving distance is 1μm
22. Power parameters: use 4 AA batteries (6V) for power supply
Communication frequency: 2.402GHz~2.480GHz; Sensitivity: -96dBm Antenna: IPEX; Transmission distance: 50 meters in open field; Sensor accuracy: 0.001mm, error ±0.001mm; Reset method: Click on the main screen to reset; Screen size: 4.3 inches; screen ratio: 16:9; touch type: touch screen; screen resolution: 480*272; screen brightness: 300nit adjustable; effective display: 95.04*53.86mm; calibration method: 0-70mm adjustment manual calibration; battery display : Dual battery display on the home screen
23. The vertical locking and the positioning button are separated to ensure accurate operation at any angle. The precisely designed lateral rotation operation space, the distance between the knob and the U-shaped seat is 28mm
24. Direct positioning according to the map at the Bregma point, avoiding secondary reading and calculation, and simplifying the experimental operation process
25. The locator has a constant temperature function. It is heated by far infrared rays similar to sunlight. The heat is easily absorbed by the animal body, which is safe and comfortable.
26. Temperature control range: room temperature ~ 60 ℃, temperature control accuracy: ±0.01 degrees, stainless steel rectal temperature sensor diameter 2mm round head, no stimulation to animals
27. Video microscope base: 300x200MM
28. Height of column lifting lens: 270MM
29. Handle fine-tuning lens (focal length) distance: 70MM
30. Lens joint rotation: 180° left and right in the horizontal direction, 180° up and down in the vertical direction, 360° forward and backward
31. CCD 38 million pixels, high-definition high-speed transmission
32. Magnification: 0.3-15.7 times, 17-inch high-definition display
33. You can take photos, watch and record videos in real time, all of which can be saved
34. With double LED cold light source, the angle can be placed at any angle
35. Simplify the tedious adjustment of the microscope, only one or two simple steps can be used to adjust the position, field of view, and clarity to the best position, which greatly saves time
36. The configuration of digital microscope, high definition of tens of millions, real-time visualization of surgery, reduce eye and physical fatigue, and higher accuracy of surgery
37. Innovative and simple structure design, shooting CCD integrates double LED cold light source integration, reducing table occupancy
38. The integrated display, cold light source, and microscope power supply box eliminate the "chaotic" arrangement of multiple power cords on the table, save space and standardize
39. Real-time shooting of the display screen presents the surgical field of view, and the spatial position adjustment is in one step.
40. Digital camera lens and CCD, base, fixed bracket, 17-inch display screen, power supply box

This parameter is the basic parameter of the equipment, please contact our company for specific parameters