Language
- 中文版
- ENGLISH

Hydraulic animal operating table (V type)

Description Parameters Resources

Features:
1. The lifting and lowering of the work surface adopts a hydraulic system, and there is a sink in the middle;
2. The left and right sides of the worktable can be tilted by 0-15° respectively, using mechanical manual operation;
3. The front and rear of the worktable can be tilted 0-45° respectively, and manual operation is adopted;
4. The base is made of A3 steel plate computer baking paint, and the pulley is prepared;
5. The countertop is made of stainless steel, which is resistant to high temperature, corrosion and rust;
6. The temperature adjustment range of the work surface: 0℃-50℃, turn on the power before working, set the required temperature, and work after 20 minutes of preheating;

Indoor ambient temperature (without cooling) 0-50℃
Countertop length and width 1400*650mm
The height of the table above the ground is 820-930mm

This parameter is the basic parameter of the equipment, please contact our company for specific parameters

Document download